Your scale will arrive pre-connected with the Vida app using cellular connectivity. This means that there’s no additional set-up to your own cellular or wifi network required on your end!
Setting Up the Body Pro Scale
After unboxing the Body Pro scale, simply pull the tab underneath the scale that is inserted in the battery cover.
During the setup process you will see these screens, indicating that the device is looking for the network and is installing. It can take a few minutes.
Using the Body Pro Scale
Once setup is complete, step on the scale with clean, bare feet. Wear as little clothing as possible.
Stabilize and stand still. If your weight is not properly distributed on the scale, arrows are displayed on the scale to indicate in which direction you should lean to stabilize your weight.
Your initials should appear on the upper left part of the screen when the measurement is done.
Additional details on display
Following your weight readings, you can also see your weight trend, your Body Mass Index (BMI), and the weather forecast.
Accessing your Body Pro Scale settings
To access the settings menu, press the button on the back of the scale for 6-8 seconds.
During that time, you will see this screen below appear. Keep holding the button until you see the menu.
Press the button on the back of the scale to navigate the menu choice. Long press to select your choice.
Info: Displays your device information such as your Mac ID.
Update: Updates the scale’s firmware. This will take a few minutes to complete and then your scale display will turn off.
App Setup: If setting up your scale through the app, the first step will be to access this option before opening the app from your smart device.
Reset: Factory reset your scale.
Quit: Exit settings